Printing A Center Mark - Ricoh FAX4800L Operator's Manual

RECEPTION

Printing a Center Mark

If you switch this feature on, a mark is printed halfway down each received page
on the left hand side. This makes it easy for you to position the hole puncher
correctly when you file away the received fax messages.
The center mark is not printed when you use the machine for making copies.
To switch this feature on, do the following. (See page 223 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 6 and 3.
Press Yes. The settings for switch 00 are
now shown on the bottom line of the
display.
2. Press
until the settings for switch 02 are
shown.
The setting that you need to change is
digit 1 (Double Underlined).
3. If you wish to change the setting, press 1 on the ten key pad.
4. Finish: Yes and Function.
124
ADVANCED FEATURES
USER PARAMETER
DEFAULT: 01000000
SWITCH00: 01000000
USER PARAMETER
DEFAULT: 01000000
SWITCH02: 01000000
SWITCH02: 0000 0010
Digit 1 (Double Underlined)
0: The center mark will not be printed
1: The center mark will be printed
PRINT LIST →
↑
YES TO END ↓
PRINT LIST →
↑
YES TO END ↓