Adjusting The Document Feeder - Ricoh FAX4800L Operator's Manual

DOCUMENT JAMS

Adjusting the Document Feeder

Depending on the thickness of the paper, three settings can be selected; thin,
normal, and thick.
1. Open the operation panel.
2. To meet the paper type to be scanned, adjust the lever position as shown in the
following table.
Paper Thickness
Thin
Normal
Thick
To correct document feed problems, adjust the lever position referring to the table
below.
Problem
Multi-feed
Feed Jam
Non-feed
Note: In a new machine the lever is in the middle position.
202
Pressure
Low
Normal
High
Position
3
1
1
SOLVING PROBLEMS
1
3
2
Position
1
2
3