Ricoh FAX4800L Operator's Manual page 184

REPORTS
The Mode Column
See the bottom of the Journal for a full listing of symbols on the Journal. On other
reports a code is given, informing the type of communication. These codes are
explained below.
The Result Column
OK: Successful Communication
E: An error occurred
STANDBY: Ready to transmit
The Footnote on the Journal
TX counter: Total number of transmitted pages
RX counter: Total number of received pages
Counters listed on the User Parameter List
SCN: Total number of pages scanned
PRN: Total number of pages printed
In the Result column, an "E" followed by a code might appear, and a message
might also appear at the bottom of the report. This code and message indicate
that a problem occurred. The codes are explained below.
Code Message
Hang up or
1
line fail
2 Busy
3 No answer
No facsimile
4
connection
Note: To switch the Confidential File Report on or off, use Function 63
(see page 97).
To switch the Error Report on or off, please contact a service tech-
nician.
The other party either hung up or had no message on polling
standby. Or there could have been a problem with the line.
The machine at the other end was busy.
The machine at the other end did not answer.
The machine at the other end is not a facsimile.
AUTOMATICALLY PRINTED REPORTS
Explanation
169