Table of Contents
Advertisement
When you install the machine for the first time, take care that the setting is
correct before you set the date and time.
1. Press Function 6 0 2 2 2 2 6 and 2.
2. Press until the screen is as shown
opposite, and then press Yes.
3 . Use the and arrows on the scroll key
to switch the feature on or off. This mode
is on if the display is shown as opposite.
4. To store your setting: Yes. And press
Function.
Terminal Identification
There are three labels which identify yourself to the operator at the other end.
These labels are called the RTI, the TTI, and the CSI.
RTI (Remote Terminal Identification) and CSI (Called Subscriber Identification):
These appear on the receiving fax machine in the display on the operation
panel during communication, and on reports after communication.
TTI (Transmit Terminal Identification): This is printed at the other end at the top
of each page received from your machine.
You can see the RTI, TTI, and CSI of the other party during the communication
(see the following diagram) and on reports printed by the machine later.
LINE TYPE (PSTN)
DP
TT
YES TO END ↓
SUMMER TIME/DST SELECT
ON
OFF
YES TO END
SUMMER TIME/DST SELECT
ON
OFF
YES TO END
RTI or CSI
APPENDIX F
SELECT ← →
↑
← →
↑
↓
← →
↑
↓
TTI
287
Advertisement
Table of Contents
