ADVANCED FEATURES
2. Press until the settings for switch 08 are
shown.
The settings that you need to change
are digit 2 (double underline) and 3
(single underline).
3. Set one of the two as shown opposite
Press 2 of the ten key pad to change the
setting of digit 2. Press 3 to change the
setting of digit 3.
4. Finish: Yes and Function.
List of Special Termi-
nals
(Function 81)
Empty
Empty/Not empty
Not empty
Not empty
Note: The combined maximum number of Special Terminals that you can program
for the features below is 30 (50 when the optional Function Upgrade Card is
installed).
- Authorized Reception
- Forwarding
- Multi-sort Document
- Memory Lock
- Memory Disk File
- Specified Cassette Selection
Authorized
Reception on/off
(Function 62)
On
Off
On
On
If you want to accept all incoming mes-
sages from the Special Terminals.
SWITCH08: 0000 0100
If you want to accept all incoming mes-
sages except those from the Special Ter-
minals.
SWITCH08: 0000 1100
Accept messages
from Special
Terminals listed or
not listed
(Function 63)
Either
Either
Listed
non-listed
RECEPTION
Result
No messages are
accepted.
All messages are
accepted.
Only messages from
Special Terminals are
accepted.
All messages are
accepted except
those from Special
Terminals.
107