Table of Contents
Advertisement
REPORTS
User Parameter List
This shows the current settings of the User Parameters.
1. Press Function 6 0 2 2 2 2 6 and 3.
2. and Start.
Quick Key Label List
Follow these steps to print out a label with the destination names/function names
currently stored in Quick Dials and User Function keys. Stick the label on the
operation panel for quick and easy reference.
1. Press Function 3 1.
2. and 2.
3. Start
A protective transparent film is attached to the operation panel. Peel off the
film and stick the Quick Key Label on the operation panel.
Cut out the Quick Key Label and glue it onto the operation panel. When you
stick it on, avoid covering the sensor near Quick Dial 49 (upper left corner).
NOTE: When replacing an old label with a new one, first remove all traces of the
old label. Sticking several labels on top of each other may cause the sen-
sor to malfunction.
Cross-references
Immediate Transmission: see page 14.
Memory Transmission: see page 15.
Confidential Transmission: see page 66.
Confidential Reception: see page 94.
Keystrokes: see page 61.
Personal Codes: see page 75.
Forwarding: see page 108.
Quick Dial: see page 291.
Transfer Request: see page 51.
Polling: see page 130.
Groups: see page 292.
Speed Dial: see page 291.
Authorized Reception: see page 104.
User Parameters: see page 227.
USER-INITIATED REPORTS
175
Advertisement
Table of Contents
