Table of Contents
Advertisement
ADVANCED FEATURES
3. Yes.
4. Input the Memory Lock ID that you will be
using. Example: 6 7 5 4 from the ten key
pad.
5. Store the ID: Yes and Function.
Editing the Memory Lock ID
1. Function 6 0 2 2 2 2 6 and 1.
2. Press until the screen is as shown
opposite.
3. Yes.
4. No and input a new number.
5. Yes and Function.
Switching Memory Lock On/Off
Before you can use Memory Lock, you have to switch it on using Function 62.
After you switch Memory Lock on, <MEMORY LOCK> will appear on the display
when the machine is in standby mode.
Note: If you switch Memory Lock on, Forwarding will be automatically disabled.
1. Function 6 0 2 2 2 2 6 and 2.
2. Scroll through the features with until the
screen is as shown opposite.
MEMORY LOCK ID
ID SETTING
_
MEMORY LOCK ID
YES OR CLR
•
NO
6754
OWN NUMBER (G3)
YES TO SET
NO
TO CANCEL
MEMORY LOCK ID
YES TO SET
NO
TO CANCEL
MEMORY LOCK ID
YES OR CLR
NO
•
6754
MEMORY LOCK ID
YES OR CLR
•
NO
5478
LINE TYPE (PSTN)
SELECT
DP
YES TO END ↓
MEMORY LOCK
SELECT
ON
YES TO END ↓
RECEPTION
YES TO END
PREVIOUS ↑
NEXT ↓
PREVIOUS ↑
NEXT ↓
← →
↑
TT
← →
↑
OFF
99
Advertisement
Table of Contents
