Changing The Paper Size In The Optional Side Paper Feed Unit - Ricoh FAX4800L Operator's Manual

LOOKING AFTER THE MACHINE

Changing the Paper Size in the Optional Side Paper Feed Unit

1. Slide out the paper feed unit until it stops.
Then, with both hands, remove it by hold-
ing it up and lifting it out at the same
time.
2. Press down the paper until it clicks into
place.
3. Pull out the paper.
4. Adjust the paper fences to the paper size.
To move a fence, pinch the top lever in
and slide the fence in or out as shown.
Make sure the positions of the two side
fences match the paper size by checking
them against the scale printed on the
bottom of the feed unit. The fences
should be aligned so that the inside
edge of each fence is
just touching the line
of the scale.
Make sure the fence is set in the groove
on the paper cassette.
180