Table of Contents
Advertisement
OTHER
Marking Up Fields
There are two types of field.
Number Fields: These are for inputting telephone numbers, personal
codes, the number of pages in the fax message (Page Count), and the
transmission start time (when using Send at a Specific Time or Send by a
Specific Time).
Name Fields: These are for any names and labels that you need to input.
Number Fields
Each digit in a number field consists of a 3 x 3 rectangular array of dots. You can
only write down the characters shown in the following diagram.
Caution:
You must write each character exactly as shown below, clearly,
carefully, and unambiguously. Otherwise, the machine may store
the wrong data or dial the wrong telephone number. The machine
cannot always detect errors in the data.
If you wish to send Tonal Signals after a telephone number, use ' •'
Note:
to indicate the start of the tonal signal. See page 81 for more de-
tails on Tonal Signals.
If you wish to input a pause in the telephone number, use a ' - ' to in-
dicate a pause.
148
ADVANCED FEATURES
Advertisement
Table of Contents
