Table of Contents
Advertisement
RECEPTION
7. Scroll through the stored RTIs/CSIs/G4 TIDs on the screen with .
It is not possible to edit previously stored RTIs/CSIs/G4 TIDs; if you wish to
do so, you must delete the incorrect label and store a new one.
To delete the displayed RTI/CSI/G4 TID: Clear.
When you have finished: Function.
Note: Messages from senders that have RTI/CSIs/G4 TIDs that match those
that were input using the above procedure will be printed using the
first (upper) paper cassette.
If there is no paper in the upper cassette, messages from the specified
senders will be stored in the memory (Substitute Reception).
If there is no paper in the lower cassette, messages from other
senders will be stored in the memory.
Selecting Specified Senders for Multi-Sort
You have to select one of the following:
Only Multi-Sort messages from specified senders
or
Multi-Sort all messages except those from specified senders.
1. Function 6 0 2 2 2 2 6 and 3.
Yes.
The settings for switch 00 are now
shown on the bottom line of the display.
2. Press until the settings for switch 08 are
shown.
The settings that you need to change
are digit 0 (double underline) and 1
(single underline).
Press 0 on the ten key pad to change
the setting of digit 0.
Press 1 to change the setting of digit 1.
122
ADVANCED FEATURES
USER PARAMETER
DEFAULT:
01000000
SWITCH00:
01000000
USER PARAMETER
DEFAULT:
01000000
SWITCH08:
01000000
SWITCH08: 0000 0000
PRINT LIST →
↑
YES TO END ↓
PRINT LIST →
↑
YES TO END ↓
Advertisement
Table of Contents
