Ricoh FAX4800L Operator's Manual page 316

Storing Numbers in a Group
First, enter Group Programming mode as explained on page 300. Then:
1. Press 1.
2. Input the number that you wish to store in
the Group. For example:
Quick Dial 25: 25
Speed Dial 00: Speed Dial 0 0.
Full number: Input at the keypad
on the operation panel.
3. Store the number in the group: Yes.
The number after DEST has in-
creased by 1. The number after
DEST shows how many telephone
numbers are stored in the Group.
Note: Do not store more than 200 numbers in a Group. If you plan to use
this Group for Transfer Requests, do not store more than 30 in it.
4. Either:
Input another number: Go to step 2.
Finish storing numbers in this
group: No.
Now, you can either:
Use another module (press a key from 1 to 5).
Start working on another Group (press Yes then
go to step 2 of the procedure on page 300).
Return to standby mode by pressing Function.
GROUP DIAL ENTER FAX NUMBER
G 01 08 DEST. 0
_
GROUP DIAL YES OR CLR
G 01 08 DEST. 0
25 XYZ COMPANY ROME
GROUP DIAL YES OR CLR
G 01 08 DEST. 0
00 XYZ COMPANY PARIS
GROUP DIAL YES OR CLR
G 01 08 DEST. 0
011-44-21-5842261
GROUP DIAL ENTER FAX NUMBER
G 01 08 DEST. 1
_
GROUP DIAL
G 01 08 DEST. 0
1.ADDRESS 2.CHECK 3.LABEL
APPENDIX F
NO TO CANCEL
• NO
• NO
• NO
NO TO CANCEL
SELECT _
YES TO END
↓
301