Table of Contents
Advertisement
ROUTINE OPERATION
Storing the Economy Transmission Time
Before using Economy Transmission, you must use Function 72 to program a time
for Economy Transmissions to start. This should be the start of the off-peak rate
period for your area. After you have stored this, you will not need to change it
again until your telephone company changes the starting time of the off-peak rate
period.
1. Function 6 0 2 2 2 2 7 and 2.
2. Input the time that you always wish Economy Transmissions to start.
To change from AM to PM and vice versa, press * or #.
3. Press Yes Function when the display is correct.
SENDING A FAX MESSAGE
ECONOMY TX
TIME=
11
:00AM
← →
YES TO END
33
Advertisement
Table of Contents
