Ricoh FAX4800L Operator's Manual page 42

SENDING A FAX MESSAGE
1. Press T, 0 and 3.
2. Example: 10 pages.
1 0
3. Yes.
TTI (Transmit Terminal Identification)
Normally, the TTI programmed in your machine is printed at the top of each of the
pages you transmit when they are received at the other end. The top of the image
will be overprinted if there is no margin at the top of the transmitted page.
In some cases, you may wish the other party to receive an unmarked copy of your
original. In this case, you can switch TTI off.
Note: If you switch TTI off, make sure that Label Insertion is also off if you want
the image received at the other end to be unmarked.
Cross-references
TTI: see page 265.
1. Press T, 0 and 6.
2. If you wish to change the TTI setting,
press W or V until the displayed setting
is correct.
3. Yes when you have finished.
30
Label Insertion: see page 88.
ROUTINE OPERATION
PAGE COUNT SET COUNT
_
PAGE COUNT PRESS YES OR NO
10
SELECT ← → YES TO END
TTI
ON
SELECT ← → YES TO END
TTI
ON
PAGE(S)
NO TO END
PAGE(S)
OFF
OFF