Table of Contents
Advertisement
Symbols
Most procedures start from standby mode,
that is, when the display is as shown on the
right. The value after "MEMORY" shows how
much memory space is remaining.
Note: If you start a procedure and do not enter anything at the operation
panel for more than 5 minutes, the machine returns to standby mode.
Symbols
The text contains a few symbols that highlight important pionts or direct you
towards other parts of the manual that are related to the feature currently being
described.
indicates a hint (for example, indicating a page number where
related information can be found).
Accessing Previously Used Functions
When you press Function, the names of the last four functions you have used
come up in order on the display. This allows you to easily select a function that
you have recently used.
Note: If you want to re-use functions 61 and above, you will still need to enter the
access code (2222) and function number after following the procedure below.
1. Press Function.
The names of the last 2 functions are
displayed.
2. Use the and keys to move the >>
symbol.
If you press a few times, the
remaining 2 functions are displayed.
If the function you want is not there, either:
Press No.
Press until the display changes to
that shown opposite.
Then enter the function number as you
would normally.
3. Press Yes.
4
HOW TO USE THIS MANUAL
MEMORY TRANS.
SET DOC. OR ENTER FAX NO.
FUNCTION
>>POLLING RECEPTION
SYSTEM SET
>>QUICK DIAL PROG./CHNG
TRANSMISSION CLR/CHNG
QUICK DIAL
PRINT LIST →
NO TO CANCEL
APR.4.12:12PM
MEMORY 100%
YES OR NO
↑
↓
↑
↓
CHOOSE KEY
Advertisement
Table of Contents
