Table of Contents
Advertisement
TRANSMISSION
Storing a Keystroke Program
1. Make sure that the machine is in standby
mode (see page 16).
2. Place a sheet of paper in the feeder.
Skip step 2 if you are making a Poll-
ing Reception program.
3. Select all required features (such as Trans-
fer Request) and telephone numbers as
you would normally do.
Contrast, resolution, and halftone
cannot be stored in a keystroke pro-
gram.
4. Press the Quick Dial key or Speed Dial
with two digits code that you wish to
store the program in.
Example: Quick Dial Key 01.
or
Speed Dial, 1 and 0.
Make sure that this key is vacant.
5. To complete the program: Yes.
Note: The procedure that you just stored will now begin. If you do not wish to
use the procedure now, press Stop immediately.
62
ADVANCED FEATURES
MEMORY TRANS.
SET DOC. OR ENTER FAX NO.
MEMORY TRANS.
ENTER FAX NUMBER
_
PROGRAM?
YES OR NO
APR.4.12:25PM
MEMORY 100%
↓
OPTIONS
Advertisement
Table of Contents
