Table of Contents
Advertisement
RECEPTION
3. Type in an RTI, CSI or G4 TID, then press
Yes.
Label input and editing: see page 220.
4. Either:
Store this RTI as a wild card: Yes.
Otherwise: No.
5. Either:
Enter another RTI, CSI or G4 TID: Go to step 3.
Finish: Function.
6. Scroll through the stored RTIs/CSIs/G4 TIDs on the screen with .
It is not possible to edit an RTI/CSI/G4 TID; if you wish to do so, you must
delete the incorrect entry and re-input it.
To delete the displayed RTI/CSI/G4 TID: Clear. Go to step 2.
When you have finished: Function.
Note: When you program a G4 TID, program "Country Code" "-" "Telephone
Number" "=" "Terminal ID Code". Program "-" and "=" in the way to store symbols.
Selecting Which Messages to Accept
You can select one of the following two kinds of Authorized Reception:.
Only accept incoming messages from the Specified Senders whose
RTI/CSI's are programmed.
Accept all incoming messages except those from the Specified Senders
whose RTI/CSI/G4 TID are programmed.
1. Function 6 0 2 2 2 2 6 and 3.
The settings for switch 00 are now
shown on the bottom line of the display.
106
ADVANCED FEATURES
AUTHORIZ. RX
STORE AS WILD CARD? YES
XYZ. CO.
AUTHORIZ. RX
ENTER RTI/CSI
NO TO CANCEL
_
•
NO
A BC
Advertisement
Table of Contents
