Table of Contents
Advertisement
RECEPTION
Locking Incoming Messages (Memory Lock)
Overview
If Memory Lock is switched on, the machine will not print any incoming fax
messages. They will be kept in memory until you enter the Memory Lock ID that
you previously stored in the machine. Messages received by Confidential
Reception will not be printed when you input the Memory Lock ID.
To use Memory Lock, you must first:
Store a Memory Lock ID.
Switch Memory Lock on.
To make Memory Lock more versatile you may choose to receive messages from
select locations into memory or exclude certain select locations from coming into
memory. You may:
Specify the senders whose messages you want to be lock in memory. Do this
by programming the RTI, CSI ir G4 TID of these senders
Select the messages to store in memory:
a) All messages from specified senders.
b) All messages except those from specified senders.
Cross-reference
Storing a Memory Lock ID
This can be any four-digit code (using digits 0 to 9), except 0000.
1. Function 6 0 2 2 2 2 6 and 1.
2. Press until the screen is as shown
opposite.
98
Confidential Reception: see page 94.
ADVANCED FEATURES
OWN NUMBER (G3)
YES TO SET
NO
TO CANCEL
MEMORY LOCK ID
YES TO SET
NO
TO CANCEL
PREVIOUS ↑
NEXT ↓
PREVIOUS ↑
NEXT ↓
Advertisement
Table of Contents
