Ricoh FAX4800L Operator's Manual page 40

SENDING A FAX MESSAGE
If you input your Personal Code, your name will appear on the Journal and
Transmission Result Report.
1. Press T 0 1.
2. Enter the Personal Code
Example: 7 3 6 2
The display shows the name that
was stored with the code that you
selected. In this example, it is
SMITH.
3. Yes.
See page 75 for details on how to program
the Personal Codes and their labels.
Sending at a Specific Time
This feature is called Send Later.
Using this feature, you can instruct the machine to delay transmission of your fax
message until a later time, which you specify. This allows you to take advantage of
off-peak telephone line charges without having to be by the machine at the time.
CAUTION: If your machine's memory is full, you will have to keep the
message in the document feeder. This means that nobody can
use the document feeder unless they remove your document. This
would automatically cancel the Send Later operation.
1. Press T, 0 and 2.
28
ROUTINE OPERATION
PERSONAL CODE
_
PERSONAL CODE PRESS YES OR NO
7362
SEND LATER ENTER START TIME
:
_
NOW 12:15 PM
ENTER CODE
NO TO END
SMITH
AM/PM: #
NO TO END