Ricoh FAX4800L Operator's Manual page 318

Storing a Group Transfer Station
Group Transfer Station is one of the features of this machine that allows you to set
up fax transmission networks.
Briefly, the Group Transfer Station allows another party to send you a fax message
and instruct your machine to send it to each number in the same Group, through
the Group Transfer Station, which acts as a broadcaster. This means that your
machine will relay the fax message to the Group Transfer Station, and that station
will then send it on to each of the numbers stored in that Group. All this will be
done automatically, without requiring your presence at the machine.
A
The use of the Group Transfer Station is described in more detail in the section
entitled "Networking".
To store a Group Transfer Station for a particular Group, first, enter Group
Programming mode as explained on page 300. Then:
1. Press 4.
2. Store the telephone number of the termi-
nal that you wish to act as the Group
Transfer Station for this group.
Input the number as a Quick Dial,
Speed Dial, or full number at the key-
pad.
Example: Quick Dial 15, press 15.
B
Your Machine
Group: Group Transfer Station: C
End Receivers: D, E, and F
D
C
E
F
GROUP DIAL
G 01 08 DEST. 0
_
GROUP DIAL
G 01 08 DEST. 0
15 XYZ COMPANY LONDON
APPENDIX F
ENTER TRANSF. STN
NO TO CANCEL
YES OR CLR • NO
303