Measurement In Manual Mode; Setting Of Conditions - Hitachi ZA3000 Series Instruction Manual

8. MEASUREMENT IN MANUAL MODE

8.1 Setting of Conditions

(1) On the [Method of injecting samples] of the Measurement
Mode display of the Analytical Condition window (Fig. 8-1),
select [Manual].
Fig. 8-1 Analytical Condition Window
(2) Make entries in the [Element], [Instrument Setup],
[Analytical Condition], [Standards Table], [Sample Table]
and [Report Format] windows. See "3. Measurement with
Conditions Input" for the detailed conditions setting.
(3) Click the [Verify] button.
8 - 1
8.1