Download Print this page

Hitachi L51K Instruction Manual

Hide thumbs

Advertisement

Quick Links

Notes for operators and responsible maintenance personnel
★ Please read through this Instruction Manual as well as the separate Instruction
Manual "Safety (MN1-5984)" and "Cleaning, Disinfection and Sterilization
(MN1-6000)" carefully prior to use.
★ Keep this Instruction Manual together with the ultrasound diagnostic instru-
ment for any future reference.
© Hitachi, Ltd. 2016, 2017. All rights reserved.
L51K Probe
Instruction Manual
Specification
MN1-6268 Rev. 2
i
MN1-6268 Rev.2

Advertisement

loading

  Summary of Contents for Hitachi L51K

  • Page 1 ★ Please read through this Instruction Manual as well as the separate Instruction Manual “Safety (MN1-5984)” and “Cleaning, Disinfection and Sterilization (MN1-6000)“ carefully prior to use. ★ Keep this Instruction Manual together with the ultrasound diagnostic instru- ment for any future reference. © Hitachi, Ltd. 2016, 2017. All rights reserved.
  • Page 2 MN1-6268 Rev.2...
  • Page 3 MN1-6268 Rev.2 Introduction This is the instruction manual for L51K probe. The probe is available by connecting to Hitachi’s ultrasound diagnostic instrument. It is operated by grasping with a forceps and can be mainly used for observation of human internal organs during surgery.
  • Page 4: Table Of Contents

    MN1-6268 Rev.2 CONTENTS 1. General Information ...........................1 1-1. Intended use ...................................1 1-2. Classification of ME equipment ............................1 1-3. Standard components ..............................1 1-4. Options ..................................2 2. Specifications and Parts name ........................3 2-1. Specifications .................................3 2-2. Name of each parts ................................4 2-3. Forceps...................................5 3.
  • Page 5: General Information

    • Operation mode ....................Continuous operation • Method of sterilization ..................Refer to the separate instruction manual “Cleaning, Disinfection and Sterilization” 1-3. Standard components The standard components of L51K probe are as follows. L51K Probe ··························································· 1 set Storage case ··························································· 1 set Instruction Manual •...
  • Page 6: Options

    MN1-6268 Rev.2 1-4. Options The following options are available for this probe. • Reprocessing by liquid detergent, disinfectant or sterilant Whole the probe is able to immerge into the liquids by putting the connector of the ultrasound probe to the waterproof case WP-001 as below table 1.
  • Page 7: Specifications And Parts Name

    At the time of publication of this manual, the connectable diagnostic ultrasound instrument or instrument software version available with this probe is different for each country, please refer to the instrument instruction manual or contact your local Hitachi representative. Field of view:...
  • Page 8: Name Of Each Parts

    MN1-6268 Rev.2 2-2. Name of each parts The name of each part is shown in Figure 2 and the explanation for each part is listed in Table 2. Cable Cable Probe tip Probe tip Front mark Front mark Ultrasound Ultrasound radiation part radiation part Front mark...
  • Page 9: Forceps

    MN1-6268 Rev.2 2.3. Forceps Forcepses listed in the table 3 are recommended for using with the probe. If you are unable to purchase the forceps, please contact our sales office. Table 3 Forceps Product Manufacturer AdTec® mini PO305R B.Braun Aesculap® ProGrasp™...
  • Page 10 MN1-6268 Rev.2...
  • Page 11: Preparations Before Use

    MN1-6268 Rev.2 3. Preparations before use This chapter describes preparations needed to use the probe safely. Please prepare the probe prior to each use by following the instructions below. 3-1. Visual check Visually check the probe tip, ultrasonic radiation part, cable, and connector. If any holes, indentations, abrasion, cracks, deformation, looseness, discoloration, or other abnormalities are found, do not use the probe.
  • Page 12 MN1-6268 Rev.2 Caution Do not use the probe if the displayed scan type and frequency do not correspond to those of the probe. Incorrect acoustic output can result in burns or other injuries to the patient. Contact our office written on the back cover.
  • Page 13: Operation

    MN1-6268 Rev.2 4. Operation This chapter describes the operation of the probe. 4-1. Insertion of the probe Gently insert the tip of the probe into the insertion opening of the trocar. 4-2. Operation Grasp the fin with a forceps and place the ultrasonic radiation part of the probe onto the inner organ surface during surgery.
  • Page 14: Pulling Out The Probe

    MN1-6268 Rev.2 Caution Do not operate the probe with excessive force. Use with excessive force could result in injury to the patient. Scan for minimum time necessary at the lowest possible acoustic output. Acoustic output may affect the patient’s internal tissues. For details about the acoustic output, please refer to the documentation supplied with the ultrasound diagnostic instrument.
  • Page 15 MN1-6268 Rev.2 This page intentionally left blank -11-...
  • Page 16 +81-3-6284-3668 http://www.hitachi.com/businesses/healthcare/index.html Overseas Offices: Hitachi Medical Systems GmbH Otto-von-Guericke-Ring 3 D-65205 Wiesbaden, Germany EU Importer: Hitachi Medical Systems Europe Holding AG Address: Sumpfstrasse 13 CH-6300 Zug, Switzerland US Importer: Hitachi Healthcare Americas Corporation Address: 1959 Summit Commerce Park, Twinsburg, Ohio 44087 Distributor MN1-6268 Rev.

This manual is also suitable for:

S12L43k