4.1 Data Table
In Data Table, the numeric data of each sample is listed and
various data editing operations can be performed.
There are 3 display formats of measurement result (Data
Tables); [Table of Each Element], [Detail Table] and
[Concentration Table]. Each table is selectable by clicking the
down arrow at the right of Data Table.
The sample IDs displayed in a data table are only those of STD
and UNK in case of the simple working curve method described
in Section 3, but the sample IDs listed in the table below may be
indicated when utilizing various measurement methods.
The asterisk (*) represents a number.
Sample ID
BLANK
Blank solution
STD
Standard sample
STDR
Reslope sample
STDC
Standard check sample
QCS
QC check sample
UNK-
Unknown sample
UNK-A
Spike-added unknown sample
UNK-D
Diluted unknown sample
UNK-W
Unknown sample diluted twice
UNK-DA
Diluted unknown sample with addition of spike
(1)
Table of Each Element
An analytical table of all samples with the selected element
can be displayed.
On all samples, the corrected concentration, relative
standard deviation, absorbance and reference of the
specified element are displayed.
When there are many samples, list display can be scrolled
by clicking the scroll bar at the right of this table.
A hidden element is selectable by clicking the down arrow
at the right of [Element].
4 - 3
Sample ID Codes
Type of Sample
4.1