Table of Contents
Advertisement
■ FADE-IN
1. Press the FADE button before recording to
select the fade mode.
2. Press the Start/Stop button to start recording.
• The picture fades in automatically and
recording starts.
■ FADE-OUT
1. While the camera/recorder is recording, press
the FADE button to select the fade mode.
2. Press the Start/Stop button to stop recording.
• Tt^e^ picture fades out automatically and
"REC" flashes until the fade ends then
recording stops.
NOTE: When fading out be sure to wait until the
PAUSE indicator (II) is visible in the viewfinder
before attempting to put the camera/recorder
into the record mode again.
16x9 MODE
Pressing the 16x9 button during recording or recording pause fades the top and bottom of the picture
in the viewfinder to black.
AE.100
AE:100
16X9
II
n
•
"16x9" is displayed in the viewfinder.
• When the 16x9 button is pressed again,
"16x9" disappears and the normal picture is
restored.
AUTOMATIC DATE RECORDING
This feature records the date automatically once
a day.
After you begin recording, the date is
recorded automatically for 10 seconds. The same
date is recorded again in the following cases.
• When the cassette is replaced
• When "©AUTO" is displayed again after
being switched to the date display
• When the recording is for less than 10 seconds
If the date changes while recording continues
over 10 seconds, the date is recorded for 10 sec¬
onds when recording is restarted after the cam¬
era/recorder has been set to the standby mode.
Press the DATE button until "©AUTO" and the
date appear in the viewfinder before you begin to
record. The date will be recorded whenever it
appears in the viewfinder.
23
Advertisement
Table of Contents
