Hitachi ZA3000 Series Instruction Manual page 253

3.1.8
The sample to be measured is indicated by , and
specification can be made per element. For selecting the
measurement object, click the relevant row, and when it
turns blue, click the row again or click the [Measure (UNK)]
button. To deselect a measurement object, similarly, click
the relevant row, and when it turns blue, click the row again
or click the [Not Measure (UNK)] button.
(1) Click the [Autosampler] button (<7> in Fig. 3-1) to display
3.1.8 Setting
the Autosampler window.
Autosampler
Usually, the Sample Injection window appears as shown in
Fig. 3-24. However, if other input window is open, click
the [Sample Injection] tab (<1> in Fig. 3-24) at the top to
display the Sample Injection window.
<1> <2> <3> <4>
Fig. 3-24 Autosampler Window (Sample Injection)
3 - 29