How To Input Measurement Conditions - Hitachi ZA3000 Series Instruction Manual

2.3.3 How to Input
Measurement
Conditions
(3) Toolbox
Contains a number of large buttons arranged vertically on
the left edge of the screen.
Buttons that are frequently used for start of measurement,
window selection, etc. are displayed here. As with the
toolbar buttons, the name of each button can be checked
by using the mouse.
(4) Status Bar
Indicates the operational guide or instrument status located
at the bottom left corner of the screen.
The following guide is displayed with respect to mouse
pointer or cursor position.
 Allowable input range for item
 Description of toolbar or toolbox buttons
 Description of command
For setting the instrument conditions for atomic absorption
spectrophotometer, click the necessary button to open a window,
and then display data or enter numerical values. A number of
input methods are available as described below.
(1) Selection among Radio Buttons
Selectable items are displayed as shown in Fig. 2-9.
Among them, only one item is selected (
change, click the circle before the desired item.
Fig. 2-9 Example of Radio Buttons
2 - 7
2.3.3
). To make a