Table of Contents
Advertisement
3.1 Generation of Measurement Conditions
3.1.1 Displaying the
Method Window
3.1.2 Setting
Measurement
Mode
3.1.3 Setting Analyte
Element
When the Method window is not yet opened, click the [Method]
button (<13> in Fig. 3-1) on the toolbox and the Method window
will appear.
Click the [Measurement Mode] button (<1> in Fig. 3-1) to open
the measurement mode window.
(1)
Click the
button (<11> in Fig. 3-1) at the right end of the
▼
Measurement Mode item and then click [Flame] from the
list that appears. (No other modes can be selected for
ZA3300). The measurement conditions that will be
displayed upon changing the measurement mode will be
the latest ones set previously for that mode.
(2)
Click the
button (<12> in Fig. 3-1) at the right end of the
▼
Sample Introduction item and then select [Manual] from the
list that appears.
(3)
For [Operator], [Analysis Name] and [Comment], desired
characters can be input after clicking each input box.
However, analysis can be carried out with no inputs in
these fields. Also, [Operator], [Analysis Name] and
[Comment] can be corrected in [Parameter List] on the
Data Process window after measurement.
(1)
Click the [Elements] button (<2> in Fig. 3-1) to display the
Elements window.
Fig. 3-2 Elements Window
3 - 2
<1>
<3>
<2>
Advertisement
Chapters
Table of Contents
Troubleshooting
