Opening Files - Hitachi ZA3000 Series Instruction Manual

2.3.4 Opening Files

(5) Input of Character String
In the display as shown in Fig. 2-13, you can input a
character string directly after clicking inside text box.
Move the mouse pointer onto the input field, and the
maximum number of characters will be displayed in a tooltip
frame.
Fig. 2-13 Example of Character String Input
A method or data file can be opened in the following procedure.
(1) Click the [Open] button
Method File] or [Open Data File] in the [File] menu.
The file opening dialog box as shown in Fig. 2-14 will open.
When no single data file is opened, click [Data] in the
toolbox to open a dialog box for directly reading files.
(2) In [Look in], specify the folder which contains the target file.
Default method file:
Library/Document/ZeemanAAS/Method
Default data file:
Library/Document /ZeemanAAS/Data
If a different location is stored after file opening or saving at
any location other than default, a change may be required.
2 - 9
on the toolbar or click [Open
2.3.4