Hitachi ZA3000 Series Instruction Manual page 467

SAFETY SUMMARY
General Safety Guidelines
Precautions before Use
 Before using the instrument, be sure to read this manual carefully
until you fully understand its contents.
 Keep this manual in a safety place nearby so that it can be
referred to whenever needed.
 Operate the instrument in the procedure given in this manual.
 Be sure to understand and observe the safety instructions given in
this manual.
 Be sure to observe the cautions indicated on the instrument and in
the manual. If this is neglected, personal injury or instrument
damage may be caused.
 Be sure to follow the original usage of the product and the usage
specified in this manual.
 Never attempt modification of the instrument, use of a part other
than specified nor instrument operation with safety devices
released, because this is dangerous.
 Do not perform operations other than those described in the
instruction manual. If any problem occurs on the instrument,
contact our sales representative or service office.
 In analysis with the atomic absorption spectrophotometer, flame
ignition is performed. Be sure to carry out analysis in the presence
of the analyst. Unattended operation is prohibited.
 When using chemicals for analytical operation, be sure to provide
proper ventilation of the laboratory room per local requirements.
Inadequate ventilation could endanger human health.
SAFETY - 2