Hitachi ZA3000 Series Instruction Manual page 96

Fig. 4-10 Profile Dialog Box
(3) Starting time configuration line is displayed (Fig. 4-
11 (1)). Place your mouse cursor around the line.
The cursor status changes to a moving cursor
( ).Click the mouse under this status and move it
right and left to determine a new starting time
position for atomized data.
(1)
(3)
Fig. 4-11 Profile Dialog Box
(4) Click "Set start time" (Fig. 4-11 (2)).
(5) Also set "Select Completed Time."
(6) After determining the processing time (range of
period for atomized data), click "Recalculate" (Fig.
4-11 (3)). The selected data are recalculated. You
can return data to the original position by selecting
the data by "Overlaying" or "Overlaying all profiles"
and, then, clicking "Reset" (Fig. 4-11 (4)).
4 - 9
(1)
(2)
4.2
(4)