Setting Automatic Start - Hitachi ZA3000 Series Instruction Manual

5.10 Setting Automatic Start

When the PC is restarted after installation of the AAS program,
the program is launched automatically to set up the online mode.
You can change this setting or carry out the procedure up to
condition setting through reading a specific method file.
For the above purpose, click the [Utilities] in the [Tools] menu
and in the Utilities window, click the [Startup] tab.
Fig. 5-21 Startup Setting
 Method File
You can specify the method file which will open automatically
at start of the AAS software. For newly creating a method
after startup, either radio button may be selected.
When the [Open Latest Method File] radio button is selected
by clicking in advance, the method file saved lastly will open
at startup. For opening a specific file, click the [Open
Specified Method File] radio button and then the [Method File]
button, and specify the file.
 Communicate with Instrument at Startup
For automatically setting the instrument online at start of the
software, click this check box to put a check mark in it.
Unless this setting is made, you should set the online mode
by selecting [Tools] - [Online] from the menu bar after startup
5 - 25
5.10