Hitachi ZA3000 Series Instruction Manual page 86

3.13
Fig. 3-40 Gas Dialog Box
When exiting the software, check that the Eco mode is off. If the
mode is on, turn it off. In the Eco state, the software cannot be
exited. Refer to 5.11 "Power/Water Saving by Eco Mode."
Fig. 3-41 Cooling Water Eco State
To disable the Eco state, click [Disable Eco State] in the
toolbar on the data collection monitor screen.
Fig. 3-42 Disable Eco State Button
The Eco state can be disabled as follows. Click [Disable Eco
State] in [Instrument Control] in the menu bar.
3 - 47