Hitachi ZA3000 Series Instruction Manual page 32

2.3 Fundamental Operation of Software Windows
(2) Putting Check Mark in Check Box
To insert a checkmark, click with the cursor in a check box
. As shown in Fig. 2-10, a check mark is put in the box
to indicate the selected status.
When clicking the check box again, the check mark
disappears to indicate the unselected status.
Fig. 2-10 Example of Check Boxes
(3) Selection of Numeric Value or Item
In the display as shown in Fig. 2-11, clicking the down
arrow  presents a list of input values. Move the cursor
to the desired value or item and click to select it.
Fig. 2-11 Example of Numeric Value Selection
(4) Input of Numeric Value
In the display as shown in Fig. 2-12, double-clicking the
numeric area allows direct input of a numeric value.
The settable range of numeric value will be displayed on the
status bar at the bottom left of window. A numeric value
under display can be incremented or decremented by the
[ ] button (up/down) at the right of the numeric value.
Fig. 2-12 Example of Numeric Value Input
2 - 8