Hitachi ZA3000 Series Instruction Manual page 372

Fig. 5-38 [Sample Name/Concentration Correction]
Window (Before Addition)
Fig. 5-39 [Sample Name/Concentration Correction]
Window (After Addition)
NOTES: 1. Change the IDs so that the inserted UNK sample
ID does not duplicate with the existing UNK
sample ID
2. Even if a sample is added above the row of an
already measured sample, it will not be measured.
3. For adding a sample on the last row, click a blank
area in the table or an item such as sample name,
to cancel the row selection (there will be no blue
rows).
5 - 43
Added sample
5.14.1