Setting Of Four-Liquid Flow Channel - Hitachi ZA3000 Series Instruction Manual

1.5.3 Setting of Four-liquid Flow Channel

1.5.3.1 Setting of Reaction Coil
Fig. 1-7 Internal Flow Channel after Removing Tube with Band Marking #4
Reconfiguration of the flow channel is required for measurement
using the four-liquid flow channel, in which a preliminary reducing
agent is automatically added by the pump.
Follow the procedures below to reconfigure the flow channel.
(1) Remove the screws from the right and left sides and the back of
the instrument and detach the cover.
Fig. 1-6 Internal Flow Channel
(2) Remove the tube with band marking #4.
1 - 8
Tube with band
marking #4