Terminating Measurement - Hitachi ZA3000 Series Instruction Manual

7.2 Terminating Measurement

7.2 Terminating Measurement
(1) After measuring a series of samples or while measurement
is paused, click the [Close Sequence] button in the toolbox.
Fig. 7-2 [Close Sequence] Button
NOTES: 1. Until the current sequence is closed, verifying new
methods or terminating the AAS program is not
permitted.
2. In the autosampler mode, the sequence is
automatically closed when measurement of the set
samples is completed, and display changes to the
Data Process window.
(2) In response to the confirmation message, click the [Yes]
button. Measurement result files are stored on a specified
folder when the auto-saving is set. The measurement result
finished is displayed on the Data Process window.
(3) Stop the cooling water.
7 - 2