Hitachi ZA3000 Series Instruction Manual page 66

(2) Profile Graph
The profile of atomization signals is displayed. This graph
is a simple monitor display and its data is not saved.
Therefore, if you change display mode, the past profile will
be erased. Display of all measured data is allowed on the
Data Process window after measurement.
When clicking the 1-sample button
overlaid in response to the repetitive measurement of the
current sample. When clicking the overlay button
dialog box for setting the number of overlaid profiles opens
and you can set the desired number, according to which
profiles will be overlaid. Then, new profiles are added
while erasing the older profiles sequentially.
(3) Data Table
Measured data is displayed while adding it one by one.
By clicking the down arrow at the right of [Data Table],
[Table of Each Element] and [Detail Table] can be selected
alternately. Under selection of Table of Each Element, the
value (mean value) for each sample ID is indicated.
Under selection of Detail Table, the repetitive measurement
data for the specified sample ID is indicated. In the latter
case, the sample ID needs to be specified after clicking the
down arrow at the right of Sample ID. To specify the
sample ID to check, click the down arrow on the right side
of the sample ID. Also, the element for data display can be
changed by clicking the down arrow at the right of
[Element] (when measurement of multiple elements is set
and they have already been measured).
(4) Working Curve Graph
Whenever the data for working curve is measured, the
curve will be displayed with the data added. If you click
the [Working Curve Detail] button
graph, the details of working curve are displayed to allow
check of the relational expression for the working curve and
the detection limit (DL). And if you click the [Working
Curve Preview] button
after measurement will be displayed.
Double-clicking of each working curve in this list will display
its details.
3 - 27
, profiles are
or double-click the
, a list of the working curves
3.3
, the