Setting Qc Conditions; Setting Report Format - Hitachi ZA3000 Series Instruction Manual

Unknown
sample
Unknown
sample
STD
–
sample
Stock STD –
QC
–
sample
Spike
–
sample
Blank test
–
solution
3.1.9 Setting QC
Conditions
3.1.10 Setting Report
Format
STD
Stock STD
sample
– –



–
 
– –
A [QC] button (<8> in Fig. 3-1) is provided on the Method
window and checks on RSD, working curve and other items can
be made.
But quantitative measurements can be carried out even if these
functions are not utilized.
Described here as a simple measurement example is a normal
quantitative measurement where QC conditions are not entered.
In this case, the procedure is advanced without making any
settings on the QC window.
For measurement using the QC function, refer to "6. UTILIZING
QC FUNCTION."
Click the [Report Format] button (<9> in Fig. 3-1) to display the
Report Format dialog. Auto-printing at the end of measurement
and the items to be printed can be selected here.
When auto-printing is not specified, printing can be made upon
selecting the desired items at the end of measurement.
Given here is a simple example where auto printing is not made.
In this case, the procedure is advanced without setting anything
on the Report Format dialog.
For the method of report setting, refer to "4.4 Saving and
Printout of Result."
 Automatic saving of analysis results
After completion of the measurement sequence, the
measured data are saved. Enter the name of the folder to
save to and the name of the file in the Filename field. The file
name contains a date and time number, preventing the
previous data from being overwrtitten.
3 - 41
Allowable: , Unallowable: –
QC Spike
sample sample
– –

–
 
–
–
– –
3.1.9
Blank test
solution
–
–
–
–
–