Hitachi ZA3000 Series Instruction Manual page 90

The asterisk (*) represents a number.
Sample ID
BLANK Blank solution
STD Standard sample
STDR Reslope sample
STDC Standard check sample
QCS QC check sample
UNK- Unknown sample
UNK-A Spike-added unknown sample
UNK-D Diluted unknown sample
UNK-W Unknown sample diluted twice
UNK-DA Diluted unknown sample with addition of spike
(1) Table of Each Element
An analytical table of all samples with the selected element
can be displayed.
On all samples, the corrected concentration, relative
standard deviation, absorbance and reference of the
specified element are displayed.
When there are many samples, list display can be scrolled
by clicking the scroll bar at the right of this table.
A hidden element is selectable by clicking the down arrow
at the right of [Element].
(2) Detail Table
The repetitive measurement data of a selected element and
a selected sample can be displayed. A desired sample is
selectable by clicking the down arrow at the right of
[Sample ID].
When there are many repetitive measurement cycles, list
display can be scrolled by clicking the scroll bar at the right
of this table.
(3) Concentration Table
The concentration values (corrected) of all measured
elements in unknown samples can be listed. The corrected
concentration is the post-correction concentration after
entering a concentration correction factor value (See
"Section 3, 3.1.7(6) Input for Correction on Concentration").
4 - 3
Sample ID Codes
Type of Sample
4.1