Repair Installation - Mitsubishi Electric MELSEC iQ-R Series User Manual

5.3

Repair Installation

Perform a repair installation if a setting tool does not operate normally.
A repair installation is a function for restoring an installed file if the file is deleted by mistake.
Preparation for a repair installation
Check the followings before performing a repair installation on a setting tool.
• Log in as an administrator user to perform a repair installation on the setting tool.
• Do not run multiple installers at the same time. Doing so may cause the repair installation to be completed with an error. If
the repair installation fails, uninstall the setting tool, and then install it again.
• If the confirmation screen for User Account Control appears while performing a repair installation on the setting tool, click
"Allow" or the [Yes] button to proceed with the installation.
• Run the installer with the same version as the installed SECS/GEM communication software to perform a repair installation.
Performing a repair installation on the setting tool
The following procedure shows an example for performing a repair installation of the setting tool of Q12DCCPU-V-BZ15 on
Windows 10.
1.
Insert the product CD-ROM into a personal computer.
The setup wizard starts.
If the setup wizard does not start, double-click 'setup.exe' in the "CA-SECS for GEM ADVANCED"
ROM.
*1 The folder name of the product CD-ROM differs for each product.
5 INSTALLATION AND UNINSTALLATION
32
5.3 Repair Installation
*1
folder on the product CD-