Mitsubishi Electric MELSEC iQ-R Series User Manual page 166

Programmable controller log
The following section shows the display of SUMMARY.
Item
CPU
Ch
Ex
Dev
No
If a programmable controller log is selected in the Log list, the content of the I/O log appears in the Data View.
User Log
The following section shows the display of SUMMARY.
Item
TYPE
LEN
If a user log is selected in the Log list, the content of the user log appears in the Data View.
The following section explains the operations of the Log list.
■Summary display
Provides a summary view showing the data header in binary in the Data View.
Right-click  shortcut menu [Summary]
■Dump display
Dumps the user log content stored in the specified register in the Data View.
Right-click  shortcut menu [Dump]
■Text display
Displays the user log content stored in the specified register in the Data field.
Even when the data is long, a new line will not be created. A new line appears when "CR + LF" exists within the data.
Right-click  shortcut menu [Text]
7 BASIC FUNCTIONS
164
7.17 Log Output
Description
CPU No.
Channel number (0: 0xFF, other than 0: Channel number for communication
function)
STA#
Device type
Device number and status (ON/OFF display)
Description
Log type (TEXT: Text log, BINARY: Binary log)
Byte length