Chapter 5 Installation And Uninstallation; Installation; Setting Tool - Mitsubishi Electric MELSEC iQ-R Series User Manual
C controller/c intelligent function module secs/gem communication software pre-installed model
Hide thumbs
Also See for MELSEC iQ-R Series:
- Programming manual (2110 pages) ,
- User manual (760 pages) ,
- Reference manual (498 pages)
Table of Contents
Advertisement
5
INSTALLATION AND UNINSTALLATION
This section explains installation and uninstallation.
5.1
Installation
This section explains the method for installing a setting tool and the SECS/GEM communication software.
Setting tool
Preparation for an installation
Check the followings before installing a setting tool.
• Log in as an administrator user to install the setting tool.
• Do not run multiple installers at the same time. Doing so may cause the installation to be completed with an error. If the
installation fails, uninstall the setting tool, and then install it again.
• If the confirmation screen for User Account Control appears while installing the setting tool, click "Allow" or the [Yes] button
to proceed with the installation.
Installation of a setting tool
The following procedure shows an example for installing the setting tool of Q12DCCPU-V-BZ15 on Windows 7.
1.
Insert the product CD-ROM into a personal computer.
The setup wizard starts.
If the setup wizard does not start, double-click 'setup.exe' in the "CA-SECS for GEM ADVANCED"
ROM.
*1 The folder name of the product CD-ROM differs for each product.
2.
Click the [Next] button.
5 INSTALLATION AND UNINSTALLATION
28
5.1 Installation
*1
folder on the product CD-
Advertisement
Table of Contents
