Gem Model State Notification Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

8.3

GEM Model State Notification Setting

Series
MELSEC-Q series
MELSEC iQ-R series
The model state notification setting is used to display the model state, such as the communication state or control state, on an
external display device such as a GOT.
Each state is assigned to a relay device.
To enable this function, select [GEM Function]  [Model State Notification].
Window
[GEMFunction]  [Model State Notification Settings]
Displayed items
Item
Communication State Model
Control State Model
Processing State Model
Spooling State Model
8 GEM COMPLIANT FUNCTIONS
178
8.3 GEM Model State Notification Setting
SECS/GEM communication software
Non-GEM version


Description
Select this checkbox to report the state of the communication state model.
The state is reported using 8 relays from the start.
Select this checkbox to report the state of the control state model.
The state is reported using 8 relays from the start.
Select this checkbox to report the state of the processing state model.
The state is reported using 8 relays from the start.
This model state can be output processing unit-wise as far as the processing state is concerned
No. of relay devices equal to (8 items from the top × no. of processing units) are used, based on the no. of processing
units set in the "Processing State Settings" screen.
Select this checkbox to report the state of the spooling state model.
The state is reported using 8 relays from the start.
GEM version


GEM advanced version

