Mitsubishi Electric MELSEC iQ-R Series User Manual page 251

Usage method (GEM version and GEM ADVANCED version)
9
■Configuring messages for spooling
Set messages subject to spooling in the "Spool List" screen. Double-click a row inserted by using the shortcut menu of the
spool list to display the "Spool Definition" screen, and then define the messages subject to spooling. (Page 198 Spool list)
■Configuring the spooling function
Configure the spooling function at the [Common] tab of the "Spool Settings" screen. ( Page 200 Common)
■Turning spooling on or off
Configure the setting to enable or disable the spooling function at the [Common] tab of the "Spool Settings" screen. If "1:
Enable" is selected for "Enable Spooling", the spool is active. ( Page 200 Common)
9 SECS/GEM COMMUNICATION SOFTWARE KNOWLEDGE
249
9.6 Using the Spool Function