Mitsubishi Electric MELSEC iQ-R Series User Manual page 41

Function
SECS Abort Frame
communication Reception
error notification
Abort Frame
Sending
Sending failure
T1 timeout
occurred
T2 timeout
occurred
T3 timeout
occurred
T4 timeout
occurred
T9 timeout
occurred
Scenario
Interruption
Handshake failure
Communication
error
System error (S9)
message sending
Control Line Connection
Request
Line
Disconnection
Offline
Online Start
Abort Frame
Sending
S9F7 sending
Spool function
ON/OFF switching
Spooled message
sending
Spooled message
discarding
Scenario
Interruption
Log output start/
end
Overview
Reports that an abort message was
received from the host.
Reports that an abort message was
sent from SECS/GEM
communication software.
Reports that data sending to the host
failed.
Reports that a timeout occurred
between characters during reception
from the host.
Reports that a protocol timeout
occurred with the host.
Reports that a response timeout
occurred with the host.
Reports that a timeout occurred
between message blocks during
reception from the host.
Reports that a T9 timer management
timeout occurred.
Reports that the scenario execution
was interrupted for some reason.
Reports that a handshake link with
the programmable controller CPU
failed during data reception.
Reporting the Stream Function
number generated by a transmission
error.
Reporting the trigger relay generated
by a transmission error.
Reports that a system error (S9)
message was sent.
Specify port open in the case of
SECS- communication. Specify
Connect or Select in the case of
HSMS.
Specify port close in the case of
SECS- communication. Specify
Disconnect in the case of HSMS.
Specify a transfer to offline state.
Start in an online state.
Specifies sending of an abort frame
for the received primary message.
Specify S9F7 sending.
Switches the spooling function on
and off by a relay.
Specifies sending of spool
messages.
Specifies discarding of spool
messages.
Specifies interruption of the scenario.
Specifies the start/end of output of
SECS transmission logs,
programmable controller CPU logs,
and user logs.
Q12DCCPU-V- RD55UP06-V-
BZ11 BZ13 BZ15 BZ11 BZ13
    
    
    
    
    
    
    
    
    
    
    
    
RD55UP12-V-
BZ15 BZ11 BZ13 BZ15
   
   
   
   
   
   
   
   
   
   
   
   
6 FUNCTION LIST
39
6