Process Program; Process Program Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

8.9

Process Program

Series
MELSEC-Q series
MELSEC iQ-R series
The following actions are possible: an automatic return of S7F20 (current EPPD data) for an S7F19 (current EPPD request)
from the host, deletion of a process program set by an S7F17 (process program deletion command) from the host, and
automatic return of S7F18 (confirmation of deletion of process program).
If the process program was changed at the equipment, the host is notified of the change information of the process program
by an S6F11 (event report sending).
This function supports the scenario that use S7F23 (Formatted Process Program Send).
In order to use an S7F3 (process program sending), define the transaction and use with the method for device association.
For usage method of process programs, refer to the following:
Page 266 Using the Process Program

Process program settings

Configure the details of the process program.
[GEMFunction]  [Process Program]
Directory
Sets the directory information and no. of directory entries that can be registered for the process program.
Window
Displayed items
Item
Directory Entry (Start)
Directory Information (Start)
No. Of Directory Entries
SECS/GEM communication software
Non-GEM version


Description
Configure the start of the register to store the entry information of the process program directory.
For more details of entry information, refer to the following:
Page 204 Directory entry information of process program
Configure the start of the register to store the directory information.
For more details of directory information, refer to the following:
Page 204 Directory information of process program
Configure the number of directory entries.
Up to 1024 directory entries can be configured.
GEM version


8 GEM COMPLIANT FUNCTIONS
GEM advanced version


203
8.9 Process Program
8