Command Setting; Parameter List - Mitsubishi Electric MELSEC iQ-R Series User Manual

Command setting

Window
Select a command setting in the "Command List" screen, right-click  shortcut menu [Modify]
Displayed items
Item
Message
Use The Key Item
Use Same Offset As Secondary Message
Use Same Offset As Select Register

Parameter list

Window
Select a command setting in the "Command List" screen, right-click  shortcut menu [Modify]  [Parameter List]
Operations of the Parameter List
Operation
Right-click  shortcut menu [Modify]
Right-click  shortcut menu [Insert]
Right-click  shortcut menu [Duplicate]
Right-click  shortcut menu [Move Up]
Right-click  shortcut menu [Move Down]
Right-click  shortcut menu [Delete]
7 BASIC FUNCTIONS
140
7.14 Data Mapping Settings
Description
Select the message to configure the command setting.

Select this checkbox to use the item property defined in the transaction as the key item.
The checkbox selection is fixed when a primary message to be received is selected.
Key Item Select the item property to serve as the key item.
Key Item Path Select the item path for the item property selected as the key item.
When there are multiple names identical to the key item within the same message, select the
corresponding key item path.
Select this checkbox to use the same offset in the transmission area of the secondary message
information of the selected message.
Select this checkbox to use the same offset Select Register of the selected message.
Description
Display the "Parameter Setting" screen to modify the content of the selected parameter.
Add a new parameter.
Copy the selected parameter, and then copy the copied parameter to the row below.
Move the selected parameter.
Delete the selected parameter.