Appendix 9 Added And Changed Functions - Mitsubishi Electric MELSEC iQ-R Series User Manual

Appendix 9
The following section shows the functions added or changed for the SECS/GEM communication software, and the software
versions of the SECS/GEM communication software for these functions.
Software version is displayed in the event history of the SECS/GEM communication software pre-installed model module.
The event history can be checked by the following methods:
• MELSEC-Q series: Check the event history of the Setting/monitoring tools for the C Controller module.
• MELSEC iQ-R series: Check the event history of GX Works3.
: Not supported
Added/changed Software version of SECS/GEM communication software
contents
MELSEC-Q series
Non-
GEM
version
Device find/replace function Ver.1.26
C
Display setting for logs Ver.1.01
View the Log on Display B
Device (GOT)
The ranges of devices that 
can be used for I/O
assignment are extended

The number of units of data
that can be set for item
information is increased
The ranges of devices that 
can be found/replaced are
extended
Default gateway setting Ver.1.29
becomes available F
The function of changing time 
in the C intelligent function
module at the reception of an
S2F31 or S2F18 message is
added

The function of returning an
S5F8 message automatically
at the reception of an S5F7
message is added
The extension of a user Ver.1.31
definition archive file is H
changed from LZH to ZIP
The basic mode is supported Ver.1.32
J
The maximum available data 
size for sending and
receiving variable data with
ASCII, BIN and JIS8 is
increased from 1024 to 2048

The maximum number of
characters for the alarm text
(ALTX) is increased from 40
to 120.

RD55UP12-V is supported.

The RD55UP06-V/
RD55UP12-V switching
function is supported.
Added and Changed Functions
MELSEC iQ-R series
RD55UP06-V
GEM GEM Non- GEM
version advanc GEM version
ed version
version
Ver.1.26 Ver.1.26 Ver.1.26 Ver.1.26
C C C C
Ver.1.26 Ver.1.26 Ver.1.26 Ver.1.26
C C C C
  Ver.1.28 Ver.1.31
E H
  
Ver.1.28
E
  Ver.1.28 Ver.1.31
E H
Ver.1.29 Ver.1.29 Ver.1.30 Ver.1.29
F F G F
  Ver.1.30 Ver.1.29
G F

Ver.100A Ver.100A Ver.1.29
F
Ver.1.31 Ver.1.31 Ver.1.31 Ver.1.31
H H H H
 
Ver.1.32 Ver.1.32
J J
Ver.1.33 Ver.1.33  Ver.1.33
K K K

Ver.1.34 Ver.1.34 Ver.1.34
L L L
 
Ver.1.35 Ver.1.35
M M
 
Ver.1.35 Ver.1.35
M M
RD55UP12-V
GEM Non- GEM GEM
advanc GEM version advanc
ed version ed
version version
Ver.1.26 Ver.1.35 Ver.1.35 Ver.1.35
C M M M
Ver.1.26 Ver.1.35 Ver.1.35 Ver.1.35
C M M M
Ver.1.31 Ver.1.35 Ver.1.35 Ver.1.35
H M M M
  
Ver.1.35
M
Ver.1.31 Ver.1.35 Ver.1.35 Ver.1.35
H M M M
Ver.1.29 Ver.1.35 Ver.1.35 Ver.1.35
F M M M
Ver.1.29 Ver.1.35 Ver.1.35 Ver.1.35
F M M M

Ver.1.29 Ver.1.35 Ver.1.35
F M M
Ver.1.31 Ver.1.35 Ver.1.35 Ver.1.35
H M M M
   
Ver.1.33  Ver.1.35 Ver.1.35
K M M

Ver.1.34 Ver.1.35 Ver.1.35
L M M
Ver.1.35 Ver.1.35 Ver.1.35 Ver.1.35
M M M M
Ver.1.35 Ver.1.35 Ver.1.35 Ver.1.35
M M M M

Appendix 9 Added and Changed Functions

Reference
Page 150 Device
Find/Replace
Page 159 Display
Setting
Page 168 View
the log on display
device (GOT)
Page 85 Available
device ranges
Page 70 Data
types (item format
codes)
A
Page 150 Device
Find/Replace
Page 132 IP
Address Setting
Page 94 Control
detail
Page 174 GEM
Performance
Definition Setting
Page 128 Project
Archive File Get

Page 291 SECS
Item List
Page 291 SECS
Item List

Page 49 Target
Module Switching
Function
APPX
299