S9 Transmission Notification - Mitsubishi Electric MELSEC iQ-R Series User Manual

S9 transmission notification

Series
MELSEC-Q series
MELSEC iQ-R series
Window
[Setting]  [Option Setting]  [S9 Transmission Notification] tab
Displayed items
Item
S9F1
S9F3
S9F5
S9F7
S9F11
S9Fx
Trigger Keep Time
Handshake
SECS/GEM communication software
Non-GEM version


Description
Configure the register to notify the programmable controller CPU of sending of an undefined device ID message.
Configure the register to notify the programmable controller CPU of sending of an undefined stream type message.
Configure the register to notify the programmable controller CPU of sending of an undefined function type message.
Configure the relay to notify the programmable controller CPU of sending of an incorrect data message.
Configure the register to notify the programmable controller CPU of sending of a message with an incorrect data
length.
Configure the relay to notify the programmable controller CPU when one of the following was sent: undefined device
ID, undefined stream type, undefined function type, incorrect data, or message with incorrect data length.
Operation of S9Fx relays is enabled regardless of the settings of the S9F1, S9F3, S9F5, S9F7, and S9F11 relays.
Configure the time to keep the notification relay.
Select this checkbox to link handshakes between the SECS/GEM communication software pre-installed model module
and programmable controller CPU with regard to S9 sending notification.
If this checkbox is selected, S9 sending notifications are subject to handshake monitoring. Programmable controller
CPU handshaking fails unless the notification relay is turned OFF by the programmable controller CPU within the time
configured by the PLC Response Monitoring Timer.
For details on the PLC Response Monitoring Timer, refer to the following:
Page 86 Control
For details on programmable controller CPU handshake failures, refer to the following:
Page 107 SECS error notification setting
GEM version


GEM advanced version


7 BASIC FUNCTIONS
109
7.7 Option Setting
7