3.2
Software Configuration
This section shows the configuration of the SECS/GEM communication software.
SECS/GEM Communication Software
Software to perform SECS/GEM communication.
The software is preinstalled on the SECS/GEM communication software pre-installed model module before product shipping.
Setting tool
Tool to configure the interface of SECS/GEM communication.
License
A license file is necessary to use the SECS/GEM communication software.
The license file is activated on the SECS/GEM communication software pre-installed model module before product shipping.
If the license file has been lost because of initialization of the SECS/GEM communication software pre-installed model
module, activate the license again.
For the license registration method, refer to the following:
Page 31 License Registration
Precautions
• One license file is assigned to one SECS/GEM communication software pre-installed model module.
• The product CD-ROM of the SECS/GEM communication software is required to recover the license file. Store the product
CD-ROM carefully so that it is not lost.
3 SYSTEM CONFIGURATION
3.2 Software Configuration
3
23