Mitsubishi Electric MELSEC iQ-R Series User Manual page 190

Displayed items
Item
On-Line Establishment
Trial
8 GEM COMPLIANT FUNCTIONS
188
8.5 Control State Model Management
Description

Select whether online establishment is to be attempted automatically by the SECS/GEM
communication software or upon request from the programmable controller CPU.
• AUTO: SECS/GEM communication software attempts to establish an online state automatically.
• MANUAL: Attempts to establish an online state upon request from the programmable controller CPU.
Determine the value of the control state notification register by the programmable controller CPU and
switch ON the online request relay defined below.
On-Line Request Configure the relay to notify the SECS/GEM communication software about the online establishment
attempt when MANUAL was selected for "On-Line Establishment Trial".
When this relay is switched ON, the SECS/GEM communication software attempts to establish an
online state.
Trigger Hold Time An online request trigger results when the On-Line Request relay is held for the configured time.
If the "Not Monitored" checkbox is selected, online request trigger processing is carried out without hold
monitoring.